Port City Makerspace - User contributions [en]

Laser Cutter

2026-08-08T23:45:23Z

GailK2: /* About our Machine */

[[File:DTCLaser.png|400px|thumb|Laser Cutter]]

=About our Machine=
'''Machine Info'''
*Manufacturer: DTC For the Future
*Model: DBL-6090
*[https://docs.google.com/document/d/1UOlYvfPJSXS3FEopwaFPE_4vo_Pn072NFG_7avTyNk0/edit?usp=sharing Manual for the machine]
*Cutting dimensions: 60cm by 90cm (23.6" by 35.4")
*Resolution: 2500 DPI
*Max stock height allowance: Over 6"
*Controller: RUIDA Controller RDC6445
*Laser tube: 100W CO2 Reci W2 Product No. 780442
*Water Chiller: S&A Cw5200 1400W
*Air compressor: Resun ACO-004. 58W, Airflow: 0.075 m3/min
*Exhaust: 350W, Airflow: 12 m3/min
*AC INFINITY Cloudline A8, Quiet 200mm Inline Duct Fan with Speed and Filter Box
*Purchased through funds raised by members and the public in 2022
*'''This tool requires a safety checkout or training before you can use it'''

[[File:AC INFINITY Cloudline A8.jpg|thumb|AC INFINITY Cloudline A8]]

=Running the Laser Cutter (LightBurn)=
These are instructions for how to operate our Laser Cutter using the LightBurn interface. LightBurn is both a design program as well as a laser control program. You can use it to create or import drawings, and in the same screen determine how the laser will burn/etch/cut the features on the screen.

Updated: 11/16/2022 by Alex N

'''Note to users of our old laser cutter:'''
'''When using this new laser, keep in mind that 50% Power will be more than twice as powerful as the old one!''' If you are using old files or sample cards as reference, make sure to account for this difference.

Here are a few differences to keep in mind between our old machine and the new one:
{| class="wikitable" style="text-align: center;"
|-
! Item !! Old Laser !! New Laser
|-
| Power || 40W|| 100W
|-
| Max Speed|| 40mm/s|| 600mm/s
|-
| Max Material Height|| 34mm (1.34") || Over 250mm (10")
|}

#'''Reserve time on the machine through the website''' - [https://www.portcitymakerspace.com/reserve-time/ Reserve Time page]
##Make sure it is available before you start using it by checking that page.
##Make sure to reserve it '''every''' time you use it, regardless of whether it is open. This helps other members know when it is occupied and can plan around it.
#'''Prepare a file in Lightburn'''
##'''Open the LightBurn program''' (dragon icon).
##'''Load drawing file or create drawing in the program.''' Ensure it is aligned as you need it. Common practice is to align drawings to the back-right or upper-right corner.
##'''Set your burn settings in the "Cuts" tab.''' Use some of the existing test cards for reference or make your own if your material is unique.
###Make sure to set your Maximum and Minimum Power! Minimum power applies with curves and corners, so it is important to make sure Minimum is set equal or close to Maximum in order to cut all the way through.
#'''Start-up Procedure:'''
##'''Turn on the power strip.''' Located behind the laser cutter. This should turn on the Air Compressor, Exhaust Fan, Water Chiller, and Power Supply for the laser.
##'''Release the red E-stop button''' by rotating it clockwise a 1/4 turn. This turns on the laser controller.
#Running a job
##'''Open the lid and place your material on the bed.''' Make sure it is well-aligned for your job.
##'''Position the material under the red probe''' either by moving the material or moving the laser with the control panel
###If there is not enough space for the material under the probe, use the Z down button to lower the table until your material fits.
##'''Press the Focus button''' to run the auto-focus feature.
###'''Press the red Stop button on the control panel if it crashes.''' This can happen if the probe is not above your material and it slips into the gaps in the honeycomb bed.
##'''Use the Frame button''' to have the machine trace out the job area. It will not fire the laser while it is doing this.
##'''Retrieve the key''' from its hiding place and '''turn the keyswitch on''' (clockwise). This will allow the laser to fire.
##'''Close the lid'''
##'''Press the Start button''' in Lightburn and watch it go.
##It is safe to watch through the window, the IR light from the laser is absorbed by the polycarbonate. The regular light can be intense when doing a cutting operation however, so avoid staring at the bright light.
#When a job is done
##The laser will stop moving. The control panel will display "Finished" below the job display
##Open the lid and remove your material. If the job involved cutting through, check the bottom compartment under they honeycomb for small pieces that fell through and clean them up.
#'''While a job is running:'''
##'''Never leave the laser unattended! Materials can catch fire!'''
##'''If there is a problem, hit the big red emergency stop button.''' Located on the front of the laser cutter.
##'''In the event of a fire''', use the the fire blanket or the white dry-type fire extinguisher located near the machine.
##'''NEVER open the lid while the laser is on!'''
#'''When done using the machine:'''
##'''Turn off the power strip.'''
##'''Turn the keyswitch off (counter-clockwise) and put key back.'''
##'''Clean underneath the aluminum honeycomb bed.'''

=Troubleshooting=
{| class="wikitable"
|The laser isn’t firing
|Make sure the keyswitch is turned to the correct position. Should be rotated clockwise.
Make sure in Lightburn that the appropriate cut lines have the “output” slider in the on position (will show green).
|-
|This fill is taking FOREVER, why?
|There are different fill settings you can use. Double-click on the color you are using for a fill, and you will be able to view the settings. “Fill all shapes at once” is the slowest setting, as it goes line-by-line across the entire surface. “Fill shapes individually” will be faster and can end up cleaner.
|-
|My wood keeps getting charred
|Look at your settings and see if you can increase the speed of the cut while decreasing the power.
|-
|My cut is not going through the entire surface
|Increase your power and decrease your speed
|-
|The laser cut all the way through my piece when I wanted to engrave it
|Lower the power setting on the cut
You can try increasing speed but lowering the power should help the most.
|-
|This acrylic is chipped on the underside
|?
|-
|I don’t know what settings to use
|Use an existing sample card that is similar to the material you are using.
If a sample doesn’t exist, you can use a built-in “Material Test” in LightBurn in the Laser Tools menu at the top.
Engraved fills will need slightly less power than engraved lines
Small engraved fills will need slightly more power than large engraved fills
|}

=Safe and Unsafe Materials=
[https://web.archive.org/web/20221206004126/http://wiki.atxhs.org/wiki/Laser_Cutter_Materials Referenced from ATX Hackerspace's wiki]

There are a wide range of materials that our Laser Cutter can cut, etch or mark - but some simply don't work (eg metals) and some are extremely hazardous to either humans or the machine itself (eg PVC and Vinyl). It is therefore imperative that you check these lists before attempting to cut materials that you have not worked with before.

It is not always obvious which materials will work - for example: Polycarbonate/Lexan produces flames and lethal chlorine gas which will rapidly corrode this normally $10,000 machine into uselessness '''and''' which is extremely hazardous to the health of people nearby. Yet Acrylic - which looks, smells, feels and tastes just like Lexan - cuts smoothly and cleanly and is one of the best materials to use with the laser! So check and double-check what you're cutting.

'''WARNING''': Because many plastics are dangerous to cut, it is important to know what kind you are planning to use. Make has a How-To for identifying unknown plastics with [http://blog.makezine.com/archive/2011/09/identifying-unknown-plastics.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+makezineonline+%28MAKE%29&utm_content=Google+Reader a simple process].

{| class="wikitable"
|style="background-color:#ff8888; text-align: center;" | '''UNSAFE'''
|
* PVC (Poly Vinyl Chloride)/vinyl/pleather/artificial leather
**Releases chlorine gas when burned - dangerous for humans and damages the machine
* Thick ( >1mm ) Polycarbonate/Lexan
* ABS
* HDPE/milk bottle plastic
* PolyStyrene Foam
* PolyPropylene Foam
* Epoxy
* Fiberglass
* Coated Carbon Fiber
* Any foodstuff ( such as meat, seaweed 'nori' sheets, bread, tortillas... )
|-
|style="background-color:#bbffbb; text-align: center;" | '''Safe to cut and etch'''
|
* Many woods
* Plywood/Composite woods
* MDF/Engineered woods
* Paper, card stock
* Cardboard, carton
* Cork
* Acrylic/Lucite/Plexiglas/PMMA
* Thin Polycarbonate Sheeting (<1mm)
* Delrin (POM)
* Kapton tape (Polyimide)
* Mylar
* Solid Styrene
* Depron foam
* Gator foam
* Cloth/felt/hemp/cotton
* Leather/Suede
* Magnetic Sheet
* NON-CHLORINE-containing rubber
* Teflon (PTFE)
* Carbon fiber mats/weave that has not had epoxy applied
* Coroplast ('corrugated plastic')
|-
|style="background-color:#ddffdd; text-align: center;" | '''Safe to etch'''
|
* Glass
* Ceramic tile
* Anodized aluminum
* Painted/coated metals
* Stone, Marble, Granite, Soapstone, Onyx.
|}

=Using the Rotary Add-On=
'''2023-03-11: THIS IS A DRAFT OF THE PROCESS TO USE THE ROTARY ADD-ON''' - Alex

The rotary add-on allows the user to engrave or cut cylindrical or round objects. There is a different setup involved that has to be done to get it ready, and it has to be un-done before you leave.

#Rotary Setup
##Turn on machine
##Lower Z-Table all the way down
##Remove honeycomb
##Place Rotary Add-On on table so it is parallel to the table
##Turn off machine
##Unplug Y-axis, plug in Rotary Add-On
##Turn machine back on, allow it to finish moving and calibrating
##Move the Y-axis by hand so the beam will be centered on the center axis of rotary add-on
##Ensure the head of the laser will not collide with the rotary add-on or material
#Using the Rotary
##Mount the material in the chuck (may need to swap out jaws depending on size or shape)
##If needed, protect your material from the bare metal jaws with foam, rubber, electrical tape.
##Slide the tail support up to the base of the material if needed to support (longer objects will definitely need it)
##Place design in lightburn where the rotary add-on is
##Measure the diameter of your piece
##-TODO: INSERT MATH TO FIGURE OUT DESIGN SCALE BASED ON DIAMETER/CIRCUMFERENCE
#Removing the Rotary
##Turn off the machine
##Remove material from the chuck
##Unplug the rotary
##Plug Y-axis back in
##Remove rotary add-on from machine
##Replace honeycomb bed
##Turn machine back on and test that it is operating normally

=FAQs=
{| class="wikitable"
|How do I get certified to use the laser cutter?
|Same as any other power tool in the shop! If you haven't used this kind of machine before, take our Intro class on the relevant topic. If you have used a machine like this, then read up on this documentation and schedule a Safety Checkout with the General Manager or Shop Manager for that area.
|-
|How do I clean the laser cutter after I use it?
|Lift the aluminum honeycomb out and sweep up small pieces with the small dustbin on the pegboard in the Electronics Lab. Clean any residue by liberally applying isopropyl alcohol to a paper towel and scrubbing the residue - it should come off fairly easily. Plywood in particular tends to leave a lot of residue.
|-
|What do I do with my scrap materials?
|Usable pieces (rectangular preferred, plenty of usable space) can be added to the wooden materials container in the Electronics Lab.
Wood that is completely used can be deposited in the scrap wood bin in the wood shop.
Any other materials get disposed of in the trash.
|}

=Maintenance=
*Vacuum the inside
**The bed of the machine should be vacuum out regularly after cutting to clean up any small pieces that fall into the honeycomb.
*Cleaning the lens and mirrors
**'''Ask someone to show you how to clean these before attempting yourself!'''
**A dirty lens can cause burnt gunk to build up and potentially crack the lens.
**Here is a video from the ATX Hackerspace on cleaning their lens - [https://www.youtube.com/watch?v=YiN3J2WShQY How to Clean Laser Optics]
*Aligning the mirrors
**This should be checked once or twice a year. A sign of misaligned mirrors is typically the laser not burning effectively when it gets farther from the top left corner.
**[https://k40.se/lens-mirrors/k40-mirror-alignment-and-leveling-old-guide/ A guide on aligning the mirrors can be found here.]

Other Maintenance Items:
*[https://www.youtube.com/playlist?list=PLW4aVhZUHNlW3FLgfivcZVMjZksYKVPCS Omtechlaser HowTo playlist on youtube] - has many videos on how to do common maintenance tasks on a similar style CO2 laser cutter.

==Parts==
*Laser Tube: 100W CO2 Reci W2 Product No. 780442
*Lens: 20mm Diameter, 63.5mm focal length
*Mirrors: 25mm Diameter, Molybdenum coated.

=External Resources=

==External Guides==
===LightBurn Video Guides:===
*[https://www.youtube.com/watch?v=BkNeVjbZncc Lesson 1: First Time User]
*[https://www.youtube.com/watch?v=uzFsrUwONbw Lesson 2: User Interface]
*[https://www.youtube.com/watch?v=nybhYtjElQU Lesson 3: Cut Settings]
*[https://www.youtube.com/watch?v=51cXqmNHgeI Lesson 4: Boolean Operations]

'''[https://github.com/LightBurnSoftware/Documentation/blob/master/README.md Official LightBurn documentation]'''

===Highlights from LightBurn's documentation:===
#[https://github.com/LightBurnSoftware/Documentation/blob/master/Toolbars.md Toolbars]
#[https://github.com/LightBurnSoftware/Documentation/blob/master/HotKeys.md General Usage Hotkeys]
#[https://github.com/LightBurnSoftware/Documentation/blob/master/CreatingNewVectors.md Creating Vectors]
#[https://github.com/LightBurnSoftware/Documentation/blob/master/EngravingImages.md Engraving Images]
#[https://github.com/LightBurnSoftware/Documentation/blob/master/ImportingExternalVectors.md Importing External Vectors]

==Where to Find Materials==
*The scrap bin by the laser cutter has plywood and acrylic
*[https://www.inventables.com/categories/materials/acrylic Inventables] has acrylic sheet in many colors
*[https://www.amazon.com/dp/B01MAT50B6/ref=cm_sw_r_em_apa_i_90LmDbJW47EMG Laserable Rubber] on Amazon
*[https://woodcraft.com/ Woodcraft] in Newington - thin plywood of various sizes
*[https://www.homedepot.com/ HomeDepot] or [https://www.lowes.com Lowes] - plywood, acrylic, and various other materials
*[https://www.joann.com/ JoAnn Fabrics] in Newington- fabrics, acrylic, plywood, and various other materials

==Shape Generators==
These can help create common but complex shapes for you to work with like boxes, gears, and more.

*[https://www.festi.info/boxes.py/ Boxes.py - TONS of Box Generators]
*[https://www.epiloglaser.com/how-it-works/laser-material-compatibility.htm List of Materials that can be laser cut]
*[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Puzzle Creator by Wolfiesden]
*[https://geargenerator.com/#200,200,100,6,1,0,0,4,1,8,2,4,27,-90,0,0,16,4,4,27,-60,1,1,12,1,12,20,-60,2,0,60,5,12,20,0,0,0,2,-563 Gear Generator]
*[http://www.makercase.com/ Maker Case] (box generator)
*[https://makeabox.io/ MakeABox.io] (box generator)
*[http://jeromeleary.com/laser/ Box Generator - Jerome Leary]
*[https://obrary.com/collections/open-designs Open Designs - Obrary] - repository of open/free designs
*[https://polygonia.design/ Polygonia Design Suite] - Pattern generator
*[https://clementzheng.github.io/joinery/help/help.html Joinery] - a large variety of joinery options for generating parametric joints for laser cutting (or Cricut). Takes an SVG in, pops an SVG out. It is also possible to save profiles.

[[Category: Tool]]
[[Category: Electronics Lab]]
[[Category: Safety Checkout]]
[[Category:_RFID_Tool_Access]]

File:AC INFINITY Cloudline A8.jpg

2026-08-08T23:38:31Z

GailK2:

AC INFINITY Cloudline A8 Quiet 200mmInline Duct Fan with Speed, attached to the Laser Cutter

Hanging Air Filter Cube

2026-07-11T23:29:13Z

GailK2:

[[File:Corsi Rosenthal Cube Filter.jpg|400px|thumb]]
=About our machine=
*Model: Corsi Rosenthal Hanging Cube
*
=Guides and Manuals=
*https://corsirosenthalfoundation.org/instructions/
https://en.wikipedia.org/wiki/Corsi%E2%80%93Rosenthal_Box

=Safety=
*
=Tips=
*
=Helpful Videos=
*
=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

Hanging Air Filter Cube

2026-07-11T23:28:28Z

GailK2: Created page with "thumb =About our machine= *Model: Corsi Rosenthal * =Guides and Manuals= *https://corsirosenthalfoundation.org/instructions/ https://en.wikipedia.org/wiki/Corsi%E2%80%93Rosenthal_Box =Safety= * =Tips= * =Helpful Videos= * =Maintenance= * Parts: Category: Tool Category: Safety Checkout"

[[File:Corsi Rosenthal Cube Filter.jpg|400px|thumb]]
=About our machine=
*Model: Corsi Rosenthal
*
=Guides and Manuals=
*https://corsirosenthalfoundation.org/instructions/
https://en.wikipedia.org/wiki/Corsi%E2%80%93Rosenthal_Box

=Safety=
*
=Tips=
*
=Helpful Videos=
*
=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

File:Corsi Rosenthal Cube Filter.jpg

2026-07-11T23:26:20Z

GailK2:

Hanging Cube Filter in Woodshop 1

Delta 50-760

2026-07-11T23:05:37Z

GailK2:

[[File:Delta 50-760 Dust Collector.jpg|400px|thumb]]
=About our machine=
*Model:Delta 50-760
*The Delta 50-760 is a highly regarded 1.5 HP portable dust collector known for its 1,200 CFM capacity and suitability for single-user workshops. It is praised for running on standard 115V household current and is considered a top-tier performer in its class.

=Guides and Manuals=
*https://drive.google.com/file/d/1X-w6aPLx08sZqY-kl92ExmVuPJxOyyyY/view?usp=drive_link
=Safety=
*
=Tips=
*
=Helpful Videos=
*
=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

Delta 50-760

2026-07-11T23:01:24Z

GailK2:

[[File:Delta 50-760 Dust Collector.jpg|400px|thumb]]
=About our machine=
*Model:Delta 50-760
*The Delta 50-760 is a highly regarded 1.5 HP portable dust collector known for its 1,200 CFM capacity and suitability for single-user workshops. It is praised for running on standard 115V household current and is considered a top-tier performer in its class.
[[File:Delta 50-760 Dust Collector|thumb|Delta 50-760 Dust Collector]]
=Guides and Manuals=
*
=Safety=
*
=Tips=
*
=Helpful Videos=
*
=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]
[[
[[File:Delta 59-769 Dust Collector|thumb]]
]]

Delta 50-760

2026-07-11T22:45:52Z

GailK2: Created page with "thumb =About our machine= *Model:Delta 50-760 *The Delta 50-760 is a highly regarded 1.5 HP portable dust collector known for its 1,200 CFM capacity and suitability for single-user workshops. It is praised for running on standard 115V household current and is considered a top-tier performer in its class. Delta 50-760 Dust Collector"

[[File:tooltemplate.jpg|400px|thumb]]
=About our machine=
*Model:Delta 50-760
*The Delta 50-760 is a highly regarded 1.5 HP portable dust collector known for its 1,200 CFM capacity and suitability for single-user workshops. It is praised for running on standard 115V household current and is considered a top-tier performer in its class.
[[File:Delta 50-760 Dust Collector|thumb|Delta 50-760 Dust Collector]]

Tool Template

2026-07-11T22:41:43Z

GailK2: Created page with "thumb =About our machine= *Model: * =Guides and Manuals= * =Safety= * =Tips= * =Helpful Videos= * =Maintenance= * Parts: Category: Tool Category: Safety Checkout"

[[File:tooltemplate.jpg|400px|thumb]]
=About our machine=
*Model:
*
=Guides and Manuals=
*
=Safety=
*
=Tips=
*
=Helpful Videos=
*
=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

Tool page template

2026-07-11T22:33:48Z

GailK2:

[[File:Delta 50-760 Dust Collector.jpg|thumb|Delta 50-760 Dust Collector in Wood Shop 1]]

File:Delta 50-760 Dust Collector.jpg

2026-07-11T22:29:54Z

GailK2:

Wood shop 1 dust collector

Delta 50-820

2026-07-11T21:53:44Z

GailK2: /* Guides and Manuals */

<gallery>
[[File:50-820.jpg|thumb|alt=Delta 50-820 Dust Collector|Delta 50-820 Dust Collector]]

=About our machine=
*Model:Delta 50-820 Dust Collector
*Maintenance for the Delta 50-820 portable dust collector centers on preserving its suction and extending motor life. Regular care involves emptying the collection bag before it is completely full, inspecting the hose and bags for tears, and cleaning the filter to maintain airflow.

=Guides and Manuals=
https://drive.google.com/file/d/1uBkRJrLx9E0M8NOtmUsCH_yOlFlUyIsb/view?usp=drive_link

=Safety=
*Key maintenance tasks and replacement steps include:Bag Maintenance: Empty the lower collection bag frequently to maintain optimal airflow. Periodically check the upper filter bag for holes or tears that can release fine dust into your shop. Never operate the machine with a damaged bag.Filter Cleaning: If you notice a drop in suction, tap the upper bag gently to dislodge dust from the filter media. For a deeper clean, remove the bag and vacuum it out or wash it (if the bag material allows) while ensuring the machine is unplugged.
Inspecting Hoses: Check for cracks, clogs, or blockages in the vacuum hose. A blocked hose will cause the motor to strain and overheat.Switch and Cord Care: Keep the electrical cord off the floor to prevent tripping hazards and potential wire damage. If the safety switch or key goes missing, replacement parts like the Delta Table Saw Switch or Delta 1343758 Key are available

=Tips=
*

=Helpful Videos=
*

=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

Delta 50-820

2026-06-27T23:59:09Z

GailK2: Delta 50-820 Dust Collector

<gallery>
[[File:50-820.jpg|thumb|alt=Delta 50-820 Dust Collector|Delta 50-820 Dust Collector]]

=About our machine=
*Model:Delta 50-820 Dust Collector
*Maintenance for the Delta 50-820 portable dust collector centers on preserving its suction and extending motor life. Regular care involves emptying the collection bag before it is completely full, inspecting the hose and bags for tears, and cleaning the filter to maintain airflow.

=Guides and Manuals=
*I downloaded the Manual, but could not Upload it. GK

=Safety=
*Key maintenance tasks and replacement steps include:Bag Maintenance: Empty the lower collection bag frequently to maintain optimal airflow. Periodically check the upper filter bag for holes or tears that can release fine dust into your shop. Never operate the machine with a damaged bag.Filter Cleaning: If you notice a drop in suction, tap the upper bag gently to dislodge dust from the filter media. For a deeper clean, remove the bag and vacuum it out or wash it (if the bag material allows) while ensuring the machine is unplugged.
Inspecting Hoses: Check for cracks, clogs, or blockages in the vacuum hose. A blocked hose will cause the motor to strain and overheat.Switch and Cord Care: Keep the electrical cord off the floor to prevent tripping hazards and potential wire damage. If the safety switch or key goes missing, replacement parts like the Delta Table Saw Switch or Delta 1343758 Key are available

=Tips=
*

=Helpful Videos=
*

=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

Tool page template

2026-06-27T23:51:06Z

GailK2: Replaced content with "thumb =About our machine= *Model: * =Guides and Manuals= * =Safety= * =Tips= * =Helpful Videos= * =Maintenance= * Parts: Category: Tool Category: Safety Checkout"

Tool page template

2026-06-27T23:43:48Z

GailK2: Delta 50-820 Dust collector in the Woodshop

[[File:tooltemplate.jpg|400px|thumb]]
=About our machine=
*Model:
*Delta 50-820 Dust Collector

=Guides and Manuals=
*I found the manual, but I need to upload or create a link to it. GK

=Safety=
*The Delta 50-820 is a compact, portable dust collector frequently utilized in small, single-tool woodshops. Featuring a 1/2 HP or 1/4 HP motor, it pulls around 500 CFM.
Woodworkers frequently modify the Delta 50-820 to maximize its capabilities and improve shop air quality:Filter Bag Upgrades: Factory stock bags (sometimes rated at 30-micron) allow fine, hazardous dust to escape. Users recommend upgrading to a 1-micron felt bag or a pleated canister filter for better airborne particle trapping.Baffle Systems: Adding a Thien baffle to the top of the collection barrel can help drop heavy chips and planer shavings before they reach the filter.Canister Conversion: Many users swap out the bag assembly entirely for an aftermarket pleated canister filter, which dramatically increases surface area and airflow.

=Tips=
*If you are maintaining a Delta 50-820, many of the original factory switches, gaskets, and hardware are discontinued. However, third-party marketplaces and tool repair sites specialize in keeping these machines running:Switches & Keys: The switch, safety key, and related hardware can be sourced from tool repair databases like eReplacementparts.com or M&M Tool Parts.Bags & Accessories: Standard 1-micron filter bags and clear plastic collection bags are generally available universally if you match the ring diameter.

=Helpful Videos=
*https://youtu.be/jp7Cw0wxobc?si=VbPnJUgh_jTX0_KJ

=Maintenance=
*Maintaining a Delta 50-829 (or similar 1.5 HP Delta dust collector series, like the 50-850) ensures peak suction and extends motor life. Routine care involves emptying the collection bag frequently, cleaning the filter, and checking for air leaks.1. The Collection BagEmpty Regularly: Do not let the lower bag overfill, as this causes debris to back up into the filter, destroying suction and motor efficiency.Clear Bags: If you use OEM clear plastic bags, empty them when they are about 3/4 full.Seals: Ensure the bag clamp provides an airtight seal when reattaching the bag to maintain proper airflow.

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

Tool page template

2026-06-27T23:42:05Z

GailK2: Delta 50-820 Dust collector in the Woodshop

[[File:tooltemplate.jpg|400px|thumb]]
=About our machine=
*Model:
*Delta 50-820 Dust Collector

=Guides and Manuals=
*

=Safety=
*The Delta 50-820 is a compact, portable dust collector frequently utilized in small, single-tool woodshops. Featuring a 1/2 HP or 1/4 HP motor, it pulls around 500 CFM.
Woodworkers frequently modify the Delta 50-820 to maximize its capabilities and improve shop air quality:Filter Bag Upgrades: Factory stock bags (sometimes rated at 30-micron) allow fine, hazardous dust to escape. Users recommend upgrading to a 1-micron felt bag or a pleated canister filter for better airborne particle trapping.Baffle Systems: Adding a Thien baffle to the top of the collection barrel can help drop heavy chips and planer shavings before they reach the filter.Canister Conversion: Many users swap out the bag assembly entirely for an aftermarket pleated canister filter, which dramatically increases surface area and airflow.

=Tips=
*If you are maintaining a Delta 50-820, many of the original factory switches, gaskets, and hardware are discontinued. However, third-party marketplaces and tool repair sites specialize in keeping these machines running:Switches & Keys: The switch, safety key, and related hardware can be sourced from tool repair databases like eReplacementparts.com or M&M Tool Parts.Bags & Accessories: Standard 1-micron filter bags and clear plastic collection bags are generally available universally if you match the ring diameter.

=Helpful Videos=
*https://youtu.be/jp7Cw0wxobc?si=VbPnJUgh_jTX0_KJ

=Maintenance=
*Maintaining a Delta 50-829 (or similar 1.5 HP Delta dust collector series, like the 50-850) ensures peak suction and extends motor life. Routine care involves emptying the collection bag frequently, cleaning the filter, and checking for air leaks.1. The Collection BagEmpty Regularly: Do not let the lower bag overfill, as this causes debris to back up into the filter, destroying suction and motor efficiency.Clear Bags: If you use OEM clear plastic bags, empty them when they are about 3/4 full.Seals: Ensure the bag clamp provides an airtight seal when reattaching the bag to maintain proper airflow.

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

JDS Air-Tech 2000

2026-06-27T23:27:43Z

GailK2:

=About our machine=
*Model:
*JDS Air-Tech 2000

=Guides and Manuals=
*No Manual Found, I will keep looking GK

=Safety=
*Electrical & Mechanical SafetyCeiling Mounting: If hanging the unit from the ceiling, ensure the mounting hardware (like chains and eye bolts) is rated for the unit's weight (typically 65+ pounds). Adding supplemental safety chains is highly recommended.Power & Unplugging: Always disconnect the unit from the power source before opening the cabinet, checking the fan, or changing the filters.No Direct Replacements from Maker: The original manufacturer (JDS Tools) has ceased operations. Because factory support and original manuals are scarce, it is critical to rely on aftermarket suppliers for replacement filters.

=Tips=
*

=Helpful Videos=
*

=Maintenance=
*The 3-Stage Filtration MechanicsThe system purifies ambient shop air using a highly efficient progression of filters:Stage 1: Pre-Filter (Intake): Captures coarse dust particles right at the entrance. Units typically ship with a disposable fiberglass pad, though many owners upgrade to a 1-inch washable electrostatic pre-filter (like the MERV 6 Electrostatic Replacement) to save on long-term replacement costs.Stage 2: High-Efficiency Internal Bag Filter: A multi-pocket bag filter (typically MERV 14 or MERV 15 rated) that stops 99% of particles down to 5 microns and 91% of micro-particles down to 1 micron. This handles the ultra-fine, lung-damaging dust.Stage 3: Diffusing & Odor Control (Exhaust): A final rear diffusing grid breaks up the exhaust stream to prevent direct drafts in your workspace. This stage can be paired with an optional activated charcoal filter to eliminate finishing fumes, smoke, and chemical odors.Maintenance & Finding ReplacementsBecause the original brand is no longer actively producing new units, knowing how to preserve yours is key:Filter Swaps: Third-party manufacturers continue to supply aftermarket filters. High-quality replacements, such as three-pocket internal bags or disposable pre-filters, are widely available through woodshop outlets like Highland Woodworking or Filtra Supply.Cleaning Routine: Disconnect the power before maintenance. Remove the outer pre-filter monthly to vacuum or wash it off. The internal bag filter can be removed through the side panel and gently tapped out or lightly vacuumed with a soft brush attachment—never use high-pressure compressed air, as it will tear the high-efficiency media.

Parts:
Looking for the exact filter replacement, still looking.

[[Category: Tool]]
[[Category: Safety Checkout]]

Delta 50-820

2026-06-27T23:23:35Z

GailK2:

<gallery>
[[File:50-820.jpg|thumb|alt=Delta 50-820 Dust Collector|Delta 50-820 Dust Collector]]

=About our machine=
*Model:
*

=Guides and Manuals=
*

=Safety=
*

=Tips=
*

=Helpful Videos=
*

=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

File:50-820.jpg

2026-06-27T23:19:48Z

GailK2:

Delta 50-820 Dust Collector

Delta 50-820

2026-06-27T23:12:00Z

GailK2: Delta 50-820

[[File:tooltemplate.jpg|400px|thumb]]
=About our machine=
*Model:
*

=Guides and Manuals=
*

=Safety=
*

=Tips=
*

=Helpful Videos=
*

=Maintenance=
*

Parts:

[[Category: Tool]]
[[Category: Safety Checkout]]

JDS Air-Tech 2000

2026-06-27T22:51:10Z

GailK2:

[[File:
<gallery>
tooltemplate.jpg
</gallery>
|400px|thumb]]
=About our machine=
*Model:
*JDS Air-Tech 2000

=Guides and Manuals=
*No Manual Found, I will keep looking GK

=Safety=
*Electrical & Mechanical SafetyCeiling Mounting: If hanging the unit from the ceiling, ensure the mounting hardware (like chains and eye bolts) is rated for the unit's weight (typically 65+ pounds). Adding supplemental safety chains is highly recommended.Power & Unplugging: Always disconnect the unit from the power source before opening the cabinet, checking the fan, or changing the filters.No Direct Replacements from Maker: The original manufacturer (JDS Tools) has ceased operations. Because factory support and original manuals are scarce, it is critical to rely on aftermarket suppliers for replacement filters.

=Tips=
*

=Helpful Videos=
*

=Maintenance=
*The 3-Stage Filtration MechanicsThe system purifies ambient shop air using a highly efficient progression of filters:Stage 1: Pre-Filter (Intake): Captures coarse dust particles right at the entrance. Units typically ship with a disposable fiberglass pad, though many owners upgrade to a 1-inch washable electrostatic pre-filter (like the MERV 6 Electrostatic Replacement) to save on long-term replacement costs.Stage 2: High-Efficiency Internal Bag Filter: A multi-pocket bag filter (typically MERV 14 or MERV 15 rated) that stops 99% of particles down to 5 microns and 91% of micro-particles down to 1 micron. This handles the ultra-fine, lung-damaging dust.Stage 3: Diffusing & Odor Control (Exhaust): A final rear diffusing grid breaks up the exhaust stream to prevent direct drafts in your workspace. This stage can be paired with an optional activated charcoal filter to eliminate finishing fumes, smoke, and chemical odors.Maintenance & Finding ReplacementsBecause the original brand is no longer actively producing new units, knowing how to preserve yours is key:Filter Swaps: Third-party manufacturers continue to supply aftermarket filters. High-quality replacements, such as three-pocket internal bags or disposable pre-filters, are widely available through woodshop outlets like Highland Woodworking or Filtra Supply.Cleaning Routine: Disconnect the power before maintenance. Remove the outer pre-filter monthly to vacuum or wash it off. The internal bag filter can be removed through the side panel and gently tapped out or lightly vacuumed with a soft brush attachment—never use high-pressure compressed air, as it will tear the high-efficiency media.

Parts:
Looking for the exact filter replacement, still looking.

[[Category: Tool]]
[[Category: Safety Checkout]]

JDS Air-Tech 2000

2026-06-27T22:30:33Z

GailK2: This is a great filtration machine for woodwoorking shops. The company is out of business, so I'm still looking for more information.

[[File:tooltemplate.jpg|400px|thumb]]
=About our machine=
*Model:
*JDS Air-Tech 2000

=Guides and Manuals=
*No Manual Found, I will keep looking GK

=Safety=
*Electrical & Mechanical SafetyCeiling Mounting: If hanging the unit from the ceiling, ensure the mounting hardware (like chains and eye bolts) is rated for the unit's weight (typically 65+ pounds). Adding supplemental safety chains is highly recommended.Power & Unplugging: Always disconnect the unit from the power source before opening the cabinet, checking the fan, or changing the filters.No Direct Replacements from Maker: The original manufacturer (JDS Tools) has ceased operations. Because factory support and original manuals are scarce, it is critical to rely on aftermarket suppliers for replacement filters.

=Tips=
*

=Helpful Videos=
*

=Maintenance=
*The 3-Stage Filtration MechanicsThe system purifies ambient shop air using a highly efficient progression of filters:Stage 1: Pre-Filter (Intake): Captures coarse dust particles right at the entrance. Units typically ship with a disposable fiberglass pad, though many owners upgrade to a 1-inch washable electrostatic pre-filter (like the MERV 6 Electrostatic Replacement) to save on long-term replacement costs.Stage 2: High-Efficiency Internal Bag Filter: A multi-pocket bag filter (typically MERV 14 or MERV 15 rated) that stops 99% of particles down to 5 microns and 91% of micro-particles down to 1 micron. This handles the ultra-fine, lung-damaging dust.Stage 3: Diffusing & Odor Control (Exhaust): A final rear diffusing grid breaks up the exhaust stream to prevent direct drafts in your workspace. This stage can be paired with an optional activated charcoal filter to eliminate finishing fumes, smoke, and chemical odors.Maintenance & Finding ReplacementsBecause the original brand is no longer actively producing new units, knowing how to preserve yours is key:Filter Swaps: Third-party manufacturers continue to supply aftermarket filters. High-quality replacements, such as three-pocket internal bags or disposable pre-filters, are widely available through woodshop outlets like Highland Woodworking or Filtra Supply.Cleaning Routine: Disconnect the power before maintenance. Remove the outer pre-filter monthly to vacuum or wash it off. The internal bag filter can be removed through the side panel and gently tapped out or lightly vacuumed with a soft brush attachment—never use high-pressure compressed air, as it will tear the high-efficiency media.

Parts:
Looking for the exact filter replacement, still looking.

[[Category: Tool]]
[[Category: Safety Checkout]]

File:6506111.jpg

2026-06-27T21:50:56Z

GailK2:

JDS Air-Tech 2000 Ceiling Mounted Air Filter