Difference between revisions of "20 Inch Planer"
Jump to navigation
Jump to search
Line 6: | Line 6: | ||
=Rules= | =Rules= | ||
*NO RECLAIMED LUMBER. If you | *NO RECLAIMED LUMBER IN THIS PLANER. Talk to Alex or Jeff about using the Dewalt planer. | ||
*DO NOT RUN NAILS, STAPLES, OR ANY NON-WOOD OBJECTS THROUGH THIS PLANER | |||
*If you put excessive wear on the blades you will be expected to pay for sharpening or new blades. | |||
*Take light passes on harder woods (1/8 turn) | |||
*Each pass should be no more than 1/4 of a turn, or 1/32" | *Each pass should be no more than 1/4 of a turn, or 1/32" | ||
* | * |
Revision as of 14:22, 5 May 2019
Info and Guides
Blades: 3x 15 inch HSS blades
Rules
- NO RECLAIMED LUMBER IN THIS PLANER. Talk to Alex or Jeff about using the Dewalt planer.
- DO NOT RUN NAILS, STAPLES, OR ANY NON-WOOD OBJECTS THROUGH THIS PLANER
- If you put excessive wear on the blades you will be expected to pay for sharpening or new blades.
- Take light passes on harder woods (1/8 turn)
- Each pass should be no more than 1/4 of a turn, or 1/32"
Useful Videos
How to Use a Surface Planer | Woodworking - Howcast on Youtube