Difference between revisions of "32 inch Hand Shear"

From Port City Makerspace
Jump to: navigation, search
(Guide)
 
Line 29: Line 29:
 
*'''BEWARE''' of pinch points on the shear where your fingers can get caught.
 
*'''BEWARE''' of pinch points on the shear where your fingers can get caught.
 
*'''USE GLOVES'''. Cut sheet metal will be razor sharp!!  
 
*'''USE GLOVES'''. Cut sheet metal will be razor sharp!!  
*'''GO SLOW'''. The shear will have a tendency to bite and suck the sheet in
+
*'''GO SLOW'''. The shear will have a tendency to bite and suck the sheet in and cut a curve.
and cut a curve.
+

Latest revision as of 18:09, 15 December 2018

32inchhandshear.jpg

Model#: HS-800

Acquired from Bolton Group (product page here)

Bed width: 31 1/2""

Maximum shear mild steel thickness: 16 gauge

Packing size: 44" x 11.8" x 29.2"

Demo Video: Bolton Tools - HS-800 - 32" Hand Shear

Guide

PLEASE READ BEFORE USING

This tool is strictly for cutting the following materials:

  • Aluminum, Brass, Copper sheet - 18 gauge - 0.05 inch
  • Mild steel sheet - 18 gauge - 0.05 inch

This tool should NOT be used to cut the following:

  • Material thicker than 18 gauge
  • Bar stock, round tubing, or anything other than sheet
  • Hardened or stainless steel sheet

Tips:

  • You can use C clamps to clamp the sheet on the frame.
  • BEWARE of pinch points on the shear where your fingers can get caught.
  • USE GLOVES. Cut sheet metal will be razor sharp!!
  • GO SLOW. The shear will have a tendency to bite and suck the sheet in and cut a curve.