Difference between revisions of "32 inch Hand Shear"

From Port City Makerspace
Jump to navigation Jump to search
(Created page with "thumb|400px Model#: HS-800 Acquired from Bolton Group [https://boltontool.com/HS-800?search=hand%20shear (product page here)] Bed width: 31 1/2...")
 
(2 intermediate revisions by the same user not shown)
Line 12: Line 12:


Demo Video: [https://www.youtube.com/watch?v=AynxZKUicTU Bolton Tools - HS-800 - 32" Hand Shear]
Demo Video: [https://www.youtube.com/watch?v=AynxZKUicTU Bolton Tools - HS-800 - 32" Hand Shear]
=Guide=
'''PLEASE READ BEFORE USING'''
This tool is strictly for cutting the following materials:
*Aluminum, Brass, Copper sheet - 18 gauge - 0.05 inch
*Mild steel sheet - 18 gauge - 0.05 inch
'''This tool should NOT be used to cut the following:'''
*Material thicker than 18 gauge
*Bar stock, round tubing, or anything other than sheet
*Hardened or stainless steel sheet
'''Tips:'''
*You can use C clamps to clamp the sheet on the frame.
*'''BEWARE''' of pinch points on the shear where your fingers can get caught.
*'''USE GLOVES'''. Cut sheet metal will be razor sharp!!
*'''GO SLOW'''. The shear will have a tendency to bite and suck the sheet in and cut a curve.
[[Category: Tool]]

Revision as of 12:44, 21 January 2020

32inchhandshear.jpg

Model#: HS-800

Acquired from Bolton Group (product page here)

Bed width: 31 1/2""

Maximum shear mild steel thickness: 16 gauge

Packing size: 44" x 11.8" x 29.2"

Demo Video: Bolton Tools - HS-800 - 32" Hand Shear

Guide

PLEASE READ BEFORE USING

This tool is strictly for cutting the following materials:

  • Aluminum, Brass, Copper sheet - 18 gauge - 0.05 inch
  • Mild steel sheet - 18 gauge - 0.05 inch

This tool should NOT be used to cut the following:

  • Material thicker than 18 gauge
  • Bar stock, round tubing, or anything other than sheet
  • Hardened or stainless steel sheet

Tips:

  • You can use C clamps to clamp the sheet on the frame.
  • BEWARE of pinch points on the shear where your fingers can get caught.
  • USE GLOVES. Cut sheet metal will be razor sharp!!
  • GO SLOW. The shear will have a tendency to bite and suck the sheet in and cut a curve.