Editing Cleaning, Draining, and Oiling the Air Compressor

Jump to navigation Jump to search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 15: Line 15:
 
==Changing Oil==
 
==Changing Oil==
 
*UNPLUG THE AIR COMPRESSOR
 
*UNPLUG THE AIR COMPRESSOR
*Materials:
+
*Grab a 1qt bottle of new oil, a funnel, an oil pan or bucket, and a few clean rags
**a 1qt or smaller bottle of new oil, 20W or 30W
+
*There is a valve below the motor for draining the oil. Position the bucket under the outlet and open the valve. Let the oil drain completely and set aside.
**a funnel
 
**an oil pan or bucket
 
**a few clean rags
 
*On the top of the motor is a cap. Unscrew and set aside. There is a pipe with a cap on it below the motor for draining the oil. Position the oil pan or bucket under the outlet and open the cap. Let the oil drain completely and set aside.
 
 
*On the top of the motor is a cap. Unscrew this and place the funnel in it. Pour the new oil in, being careful not to spill.
 
*On the top of the motor is a cap. Unscrew this and place the funnel in it. Pour the new oil in, being careful not to spill.
 
*Once oil reservoir is filled, drain a little bit of the oil to drain any remaining old oil. If it drains clear it is good to go.
 
*Once oil reservoir is filled, drain a little bit of the oil to drain any remaining old oil. If it drains clear it is good to go.
 
*Screw the top cap back on, make sure the drain valve is closed, and clean up any oil spills.
 
*Screw the top cap back on, make sure the drain valve is closed, and clean up any oil spills.
 
*Use the funnel to pour the old oil into the bottle. The used oil should be taken to an auto garage or any place that can dispose of oil.
 
*Use the funnel to pour the old oil into the bottle. The used oil should be taken to an auto garage or any place that can dispose of oil.

Please note that all contributions to Port City Makerspace may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Port City Makerspace:Copyrights for details). Do not submit copyrighted work without permission!

Cancel Editing help (opens in new window)