Difference between revisions of "Forge"
Jump to navigation
Jump to search
(Created page with "400px|thumb =About our machine= *Model: Custom built by Scott Winchester * =Guides and Manuals= * =General Tips and Safety= *DO NOT USE BEFORE GETTING PER...") |
|||
| Line 2: | Line 2: | ||
=About our machine= | =About our machine= | ||
*Model: Custom built by Scott Winchester | *Model: Custom built by Scott Winchester | ||
* | *Propane fuel with electric igniter | ||
*Stored on a cart with the Rolling Workbenches | |||
*For use outside ONLY | |||
=Guides and Manuals= | =Guides and Manuals= | ||
Revision as of 14:21, 8 October 2020
About our machine
- Model: Custom built by Scott Winchester
- Propane fuel with electric igniter
- Stored on a cart with the Rolling Workbenches
- For use outside ONLY
Guides and Manuals
General Tips and Safety
- DO NOT USE BEFORE GETTING PERMISSION FROM EITHER THE GENERAL MANAGER OR SCOTT WINCHESTER
- Wear appropriate clothing for hot work
- All cotton or natural fiber clothing. SYNTHETIC CLOTHING WILL MELT TO YOUR SKIN.
- Leather boots or shoes are preferred. NO OPEN TOED SHOES.
- Wear appropriate safety gear
- Safety glasses. A small piece of flying debris can cause a lot of damage.
- Hearing protection. Hammering causes a loud ringing that can damage your hearing, and you will be doing a lot of hammering.
- Thick leather gloves. These should be heavier than welding gloves. Note - the gloves do not permit you to directly hold hot metal, and only serve as a temporary barrier.
- Treat all metal like it is hot metal! You can't tell just by looking if a piece of metal is hot enough to burn you. Always use the tongs for moving metal until it has fully cooled down.
- Limit how much you travel with hot metal. Set up the forge next to your anvil so you don't have to walk to it.
- NEVER FORGE COATED METALS (GALVANIZED, CHROME-PLATED, ETC). Never heat galvanized metal or metal with a bright finish in your forge. The fumes from these coatings are very TOXIC. Never forge galvanized or coated metals!
Helpful Videos
Maintenance
Parts:
Main Menu
| General | Spaces | Tools | Volunteer | Instructors | Community | Communication |
|
- - - - - - |
Slack - member chat |
- - - - - - |