Jointer
Jump to navigation
Jump to search
About our machine
- Model: Powermatic PJ-882HH
Guides and Manuals
General Tips and Safety
- Use one or two pushblocks for small pieces and when appropriate
- Before operating, check the depth setting and fence squareness
- Set the cut depth to the lowest setting when jointing boards over 4"
Helpful Videos
- How to Use a Jointer | Woodworking Howcast on Youtube
- Jointer Setup | The Wood Whisperer
Maintenance
- Every use: clean dust off the machine's surface and moving parts
- As needed: Steel surface should be coated with a thin layer of paste wax
- As needed: Jointer knives need rotating to maintain a sharp cutting edge
- After 3 rotations, the knives need to be sharpened or replaced
Parts: