Editing Laser Cutter

Jump to navigation Jump to search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 56: Line 56:
 
#'''Use the Laser Focus Ruler to set the height of the bed.''' Raise/lower the bed using the adjustment wheel underneath.
 
#'''Use the Laser Focus Ruler to set the height of the bed.''' Raise/lower the bed using the adjustment wheel underneath.
 
#'''Set your burn settings in the "Cuts" tab.''' Use some of the existing test burns for reference or make your own if your material is unique.
 
#'''Set your burn settings in the "Cuts" tab.''' Use some of the existing test burns for reference or make your own if your material is unique.
#'''Click "Start" and watch it go!''' Don't stare at the light.
+
#'''Click "Start" and watch it go!''' But don't stare at the light too much.
#*'''Never leave the laser unattended as it can catch fire!'''
+
#*'''Keep an eye on it in case anything goes wrong.''' Never leave the laser unattended as it can catch fire!  
 
#*'''If there is a problem, hit the big red emergency stop button.''' Located on the top of the laser cutter. Please note that this cuts the power, but does not tell the software to stop the laser. To turn it off in the software, you can hit one of the "Test Fire" buttons in the "Console" tab.
 
#*'''If there is a problem, hit the big red emergency stop button.''' Located on the top of the laser cutter. Please note that this cuts the power, but does not tell the software to stop the laser. To turn it off in the software, you can hit one of the "Test Fire" buttons in the "Console" tab.
 
#*'''In the event of a fire''', use the white dry-type fire extinguisher by the Classroom doorway.
 
#*'''In the event of a fire''', use the white dry-type fire extinguisher by the Classroom doorway.
#*'''NEVER open the lid while the laser is on!'''
+
#*'''NEVER open the lid while the laser is in on!'''
 
#'''When done using the machine:'''
 
#'''When done using the machine:'''
 
##'''Hit the HomeXY button.'''
 
##'''Hit the HomeXY button.'''

Please note that all contributions to Port City Makerspace may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Port City Makerspace:Copyrights for details). Do not submit copyrighted work without permission!

Cancel Editing help (opens in new window)

Template used on this page: