Difference between revisions of "Drum Sander"

From Port City Makerspace
Jump to navigation Jump to search
(Created page with " =Guides and Manuals= *[https://drive.google.com/open?id=1UZbaiMd6UyRId5Hwvl33-eS3QnrzAi2W Drum Sander 19-38 Supermax] =General Tips and Safety= * *Always wear eye protect...")
 
Line 1: Line 1:
 
[[File:DrumSanderParts.png|400px|thumb]]




=Guides and Manuals=
=Guides and Manuals=
*[https://drive.google.com/open?id=1UZbaiMd6UyRId5Hwvl33-eS3QnrzAi2W Drum Sander 19-38 Supermax]
*[https://drive.google.com/open?id=1UZbaiMd6UyRId5Hwvl33-eS3QnrzAi2W Drum Sander 19-38 Supermax]
[[File:DrumSanderParts.png|380px]]




=General Tips and Safety=
=General Tips and Safety=
*
*Always wear eye protection while operating sander.
*Always feed boards against the drum rotation.
*Tighten all locks before operating.
*Keep hands and clothing away from operating drum.
*Do not operate sander with dust cover opened.
*Do not operate sander without dust collector connected to the dust cover.
*Do not operate sander without dust collector connected to the dust cover.
*Always maintain control of boards to avoid kickback (know how to prevent it).
*Always disconnect power before servicing or adjusting.
*Always disconnect power before servicing or adjusting.
*Take light passes. Make sure to go slow and light if the material is hard like maple.




=About our machine=
=About our machine=
*
*We have reels of sandpaper that is meant to be cut in to specifically shaped strips. To cut a new strip, you must either use an existing and known good strip as a template, or cut to a specific length and use a wooden template to cut the angle on the ends.
*




=Helpful Videos=
=Helpful Videos=
*
*[https://www.youtube.com/watch?v=G5_GPFoZtXg How to Change Abrasive Wraps on a Drum Sander] - SuperMax Tools
*
*[https://www.youtube.com/watch?v=ywHPvidIffw Woodworking Tips: Versatility of Surface Sanders]
 
 
=Tooling=
*
*




=Maintenance=
=Maintenance=
*
[[File:DrumSanderWrapDimensions.png]]
*

Revision as of 14:38, 3 April 2019

DrumSanderParts.png


Guides and Manuals

DrumSanderParts.png


General Tips and Safety

  • Do not operate sander without dust collector connected to the dust cover.
  • Always disconnect power before servicing or adjusting.
  • Take light passes. Make sure to go slow and light if the material is hard like maple.


About our machine

  • We have reels of sandpaper that is meant to be cut in to specifically shaped strips. To cut a new strip, you must either use an existing and known good strip as a template, or cut to a specific length and use a wooden template to cut the angle on the ends.


Helpful Videos


Maintenance

DrumSanderWrapDimensions.png