Difference between revisions of "Wood Lathe"
Jump to navigation
Jump to search
m |
|||
| Line 7: | Line 7: | ||
*Capacity: 12.5" x 43" | *Capacity: 12.5" x 43" | ||
*Speeds: 250 to 3,850 rpm | *Speeds: 250 to 3,850 rpm | ||
*Spindle: 1"x8TPI | |||
*Spindle Taper: MT2 | |||
*Hole through spindle: 3/8" | |||
Extra Lathes | Extra Lathes | ||
| Line 16: | Line 19: | ||
=Guides and Manuals= | =Guides and Manuals= | ||
* | *[https://drive.google.com/file/d/1Zoo56dYeroBFjP0AlJLjZgOuPIZcyNpq/view?usp=sharing Rikon 70-220VSR Manual] | ||
=General Tips and Safety= | =General Tips and Safety= | ||
Revision as of 12:26, 23 July 2021
About our machine
- This tool requires a safety checkout
Main Lathe
- Model: Rikon 70-220VSR
- Capacity: 12.5" x 43"
- Speeds: 250 to 3,850 rpm
- Spindle: 1"x8TPI
- Spindle Taper: MT2
- Hole through spindle: 3/8"
Extra Lathes
- Model: Delta 46-250
- Capacity: 10" x 14.5"
- Model: Central Machinery 65345
- Capacity: 10" x 18"
- Speeds: 950, 1100, 1600, 2200, 3200 rpm
Guides and Manuals
General Tips and Safety
VVV___REQUIRED SAFETY VIDEOS___VVV:
Members must watch these videos before using the lathe.
- Woodworking Tips & Techniques - Lathe Safety
- 10 Common Wood Turning Mistakes
- Woodturning - Beginners Guide Revisited #1 - The Spindle Roughing Gouge
Important Safety Rules:
- Remove any jewelry, roll up sleeves, and otherwise secure anything that could get wrapped up in the machine.
- Position the tool rest as close as possible to the material without colliding.
- After adjusting the tool rest, BEFORE TURNING IT ON spin the workpiece by hand to make sure it will not collide.
- Safety eye wear required. Faceshields are highly recommended. Safety glasses are okay, but less effective.
- Always use sharp tools! Dull tools cause chip-out, but more importantly can get caught on your material.
- Avoid using materials that may break apart. Split wood, laminated materials, rotted pieces, etc.
General Tips
- Wear an apron or smock. Turning gets pretty messy.
Helpful Videos
- Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America - WoodWorkers Guild Of America on Youtube
- Spindle Turning Safety for the Wood Lathe - WYOMINGWOODTURNER on Youtube
Maintenance
Parts:
Main Menu
| General | Spaces | Tools | Volunteer | Instructors | Community | Communication |
|
- - - - - - |
Slack - member chat |
- - - - - - |