Wood Lathe
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
About our machine
- This tool requires a safety checkout
Main Lathe
- Model: Rikon 70-220VSR
- Capacity: 12.5" x 43"
- Speeds: 250 to 3,850 rpm
- Spindle: 1"x8TPI
- Spindle Taper: MT2
- Hole through spindle: 3/8"
Chuck
- Threads: 1 1/2" x 8 (use with adapter)
Guides and Manuals
General Tips and Safety
VVV___REQUIRED SAFETY VIDEOS___VVV:
Members must watch these videos before using the lathe.
- Woodworking Tips & Techniques - Lathe Safety (3 min)
- 10 Common Wood Turning Mistakes (14 min)
- Woodturning - Beginners Guide Revisited #1 - The Spindle Roughing Gouge (12 min)
Important Safety Rules:
- Remove any jewelry, roll up sleeves, and otherwise secure anything that could get wrapped up in the machine.
- Position the tool rest as close as possible to the material without colliding.
- After adjusting the tool rest, BEFORE TURNING IT ON spin the workpiece by hand to make sure it will not collide.
- Safety eye wear required. Faceshields are highly recommended. Safety glasses are okay, but less effective.
- Always use sharp tools! Dull tools cause chip-out, but more importantly can get caught on your material.
- Avoid using materials that may break apart. Split wood, laminated materials, rotted pieces, etc.
General Tips
- Wear an apron or smock. Turning gets pretty messy.
Helpful Videos
- Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America - WoodWorkers Guild Of America on Youtube
- Spindle Turning Safety for the Wood Lathe - WYOMINGWOODTURNER on Youtube
Maintenance
Parts: