Difference between revisions of "Sawstop"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
= | =About our machine= | ||
Model of saw: PCS31230-TGP236 | Model of saw: PCS31230-TGP236 | ||
Important Notes: | '''Important Notes:''' | ||
* | *This tool requires a safety checkout! | ||
*If you trigger the $75 brake, you pay for it and the ruined blade | *If you trigger the $75 brake, you pay for it and the ruined blade | ||
* | *Ways the brake can be accidentally set off: wet lumber, conductive materials like carbon fiber and metal-backed foam, staples or nails embedded in wood. | ||
*If your material | *If you think your material might set off the brake, use Bypass mode. Ask the General Manager or Shop Manager for the key. | ||
= | =Guides and Manuals= | ||
Manual: [https://drive.google.com/open?id=1kc6kx9I-D8_kJQjvnUN3D1_GqZhrJBUZ link to google drive] | Manual: [https://drive.google.com/open?id=1kc6kx9I-D8_kJQjvnUN3D1_GqZhrJBUZ link to google drive] | ||
=Safety | =General Tips and Safety= | ||
*[https://www.youtube.com/watch?v=hxdFcRROtlQ How to Select Table Saw Blades] - choose the right blade for the right job | *[https://www.youtube.com/watch?v=hxdFcRROtlQ How to Select Table Saw Blades] - choose the right blade for the right job | ||
*[https://www.youtube.com/watch?v=u7sRrC2Jpp4 Kickback] - what it looks like, and why it happens | *[https://www.youtube.com/watch?v=u7sRrC2Jpp4 Kickback] - what it looks like, and why it happens | ||
| Line 21: | Line 19: | ||
*[https://www.youtube.com/watch?v=o7Y7jeX8p-g Working with twisted or crooked wood] - If it's not flat and stable, how to correct it so it doesn't kicback | *[https://www.youtube.com/watch?v=o7Y7jeX8p-g Working with twisted or crooked wood] - If it's not flat and stable, how to correct it so it doesn't kicback | ||
= | |||
==Specific Reminders== | |||
*'''Avoid cutting or damaging the fence.''' Don’t slam the fence into the blade while spinning down. Do not cut into the fence for rabbeting, use a sacrificial piece. | |||
*'''Know when to use the fence vs. the miter gauge or crosscut sled.''' Use the appropriate support for the cut you’re doing: use the fence for ripping, and the sled or miter gauge for crosscutting. NEVER USE BOTH. There is a high chance of the piece jamming between the blade and both of those. | |||
*Check your materials if you’re not sure if they’re conductive. Either touch it against the blade while not spinning or make a cut in Bypass mode and see if it would have triggered the brake. | |||
*Just because this is a “safer” saw does not mean it cannot hurt you. Treat it the same. | |||
==Potential Mistakes== | |||
*Moving/Working too fast. This can cause damage to our equipment. Safe practice is slow. | |||
*Touching tape measure against the blade while it spins down. This will trigger the brake. | |||
*Cutting wet wood. This will trigger the brake. | |||
*Pulling too hard on the main switch. This can damage the switch. | |||
*Contacting the blade with your hand, including when the saw is off but the blade is still moving. This will trigger the brake. | |||
==Check This Every Time== | |||
*When changing a blade: use the yellow gap checker and adjust brake spacing if necessary | |||
*When cutting anything other than plywood or kiln dried lumber: check to see if it will trigger the brake system before cutting. | |||
*Check for staples and nails. | |||
*Check the blade that is on there, make sure it is appropriate for your cut (ripping or crosscutting) | |||
=Helpful Videos= | |||
==SawStop Safety System== | ==SawStop Safety System== | ||
| Line 43: | Line 64: | ||
*[https://www.youtube.com/watch?v=tN90hAcPU7I How to Cut a Dado with a Table Saw] - WoodworkersJournal on Youtube | *[https://www.youtube.com/watch?v=tN90hAcPU7I How to Cut a Dado with a Table Saw] - WoodworkersJournal on Youtube | ||
*[https://www.youtube.com/watch?v=d-fCL-ZAVWs&list=PLA9645769789EB46E Table Saw Techniques playlist] | *[https://www.youtube.com/watch?v=d-fCL-ZAVWs&list=PLA9645769789EB46E Table Saw Techniques playlist] | ||
=Maintenance= | =Maintenance= | ||
*[https://www.youtube.com/watch?v=D_6SwIawU7U Cleaning and Oiling Lift and Tilt Mechanisms] | *[https://www.youtube.com/watch?v=D_6SwIawU7U Cleaning and Oiling Lift and Tilt Mechanisms] | ||
*[https://www.youtube.com/user/sawstop/videos All sawstop videos on their official youtube channel] | |||
*[https://www.youtube.com/watch?v=V9Cm2o1Vshg Aligning the blade] | |||
* | |||
* | |||
[[Category: Tool]] | [[Category: Tool]] | ||
[[Category: Wood Shop]] | [[Category: Wood Shop]] | ||
Revision as of 15:45, 7 March 2021
About our machine
Model of saw: PCS31230-TGP236
Important Notes:
- This tool requires a safety checkout!
- If you trigger the $75 brake, you pay for it and the ruined blade
- Ways the brake can be accidentally set off: wet lumber, conductive materials like carbon fiber and metal-backed foam, staples or nails embedded in wood.
- If you think your material might set off the brake, use Bypass mode. Ask the General Manager or Shop Manager for the key.
Guides and Manuals
Manual: link to google drive
General Tips and Safety
- How to Select Table Saw Blades - choose the right blade for the right job
- Kickback - what it looks like, and why it happens
- Ripping, Cross-cutting, push-sticks, featherboards - What they are and how you use them
- Working with twisted or crooked wood - If it's not flat and stable, how to correct it so it doesn't kicback
Specific Reminders
- Avoid cutting or damaging the fence. Don’t slam the fence into the blade while spinning down. Do not cut into the fence for rabbeting, use a sacrificial piece.
- Know when to use the fence vs. the miter gauge or crosscut sled. Use the appropriate support for the cut you’re doing: use the fence for ripping, and the sled or miter gauge for crosscutting. NEVER USE BOTH. There is a high chance of the piece jamming between the blade and both of those.
- Check your materials if you’re not sure if they’re conductive. Either touch it against the blade while not spinning or make a cut in Bypass mode and see if it would have triggered the brake.
- Just because this is a “safer” saw does not mean it cannot hurt you. Treat it the same.
Potential Mistakes
- Moving/Working too fast. This can cause damage to our equipment. Safe practice is slow.
- Touching tape measure against the blade while it spins down. This will trigger the brake.
- Cutting wet wood. This will trigger the brake.
- Pulling too hard on the main switch. This can damage the switch.
- Contacting the blade with your hand, including when the saw is off but the blade is still moving. This will trigger the brake.
Check This Every Time
- When changing a blade: use the yellow gap checker and adjust brake spacing if necessary
- When cutting anything other than plywood or kiln dried lumber: check to see if it will trigger the brake system before cutting.
- Check for staples and nails.
- Check the blade that is on there, make sure it is appropriate for your cut (ripping or crosscutting)
Helpful Videos
SawStop Safety System
These are the relevant new steps involving the safety system. Make sure you watch these!
- How does SawStop work
- Adjusting the Brake spacing
- Recovering an activated brake
- Resetting the arbor arm
- Additional safety features
- Changing to a dado blade
Table Saw Basics
Everyone should watch these! Even if you're a seasoned wood worker, a brief refresher on proper safety is never a bad thing.
- Table Saw Fundamentals
- SawStop Professional Cabinet Saw Features
- Five Minute Guide: How to Use a Tablesaw - FineWoodworking on Youtube
- How to Use a Table Saw For Beginners - Mike Pattenson on Youtube
- Choosing the Best Table Saw Blades: Woodworking for Beginners #30 - WoodWorkWeb on Youtube
- How to Cut a Dado with a Table Saw - WoodworkersJournal on Youtube
- Table Saw Techniques playlist