File:CNCMill-Pendant.jpg: Difference between revisions

Latest revision as of 16:05, 26 July 2024

The pendant control for the CNC Milling Machine. Has selector knobs for different modes of movement, and controls one axis at a time.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:05, 26 July 2024		3,060 × 4,080 (3.35 MB)	AlexN (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	samsung
Camera model	Galaxy A54 5G
Exposure time	1/40 sec (0.025)
F Number	f/1.8
ISO speed rating	125
Date and time of data generation	18:02, 26 July 2024
Lens focal length	5.54 mm
Width	4,080 px
Height	3,060 px
Orientation	Rotated 90° CCW
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	A546U1UES7CXF3
File change date and time	18:02, 26 July 2024
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.2
Date and time of digitizing	18:02, 26 July 2024
APEX shutter speed	0.025
APEX aperture	1.69
APEX brightness	1.38
APEX exposure bias	0
Maximum land aperture	1.69 APEX (f/1.8)
Metering mode	Center weighted average
Flash	Flash did not fire
DateTime subseconds	312
DateTimeOriginal subseconds	312
DateTimeDigitized subseconds	312
Supported Flashpix version	1
Color space	sRGB
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	23 mm
Scene capture type	Standard