FDS Cut50 Plasma Cutter: Difference between revisions
Jump to navigation
Jump to search
added notes on maintenance, fixed header formatting to be level 2 "==" instead of level 1 (which is standard practice, shouldn't use level 1 headers anywhere) |
MarthaBoyd (talk | contribs) m MarthaBoyd moved page Plasma Cutter to FDS Cut50 Plasma Cutter: Misspelled title |
| (One intermediate revision by one other user not shown) | |
(No difference)
| |
Latest revision as of 11:52, 24 October 2025
About our machine
- Model: FDS CUT50
- Power: 220V
- Needs to be connected to compressed air to operate
Guides and Manuals
Safety
- Eye protection: Shade 9-12 (depending on intensity of arc)
- Wear protective clothing: leather gloves, leather apron, cotton clothing. (no polyester/synthetics!)
- Clear the area of all flammables
- Avoid "blowback", which happens from either moving too fast or cutting in the middle of a workpiece rather than the edge
Helpful Videos
Maintenance
- The consumables may need replacing after using for awhile. There are 4 components that wear out:
- The ceramic cup
- The metal electrode
- The metal contact tip
- The ceramic ring