Vacuum chamber: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
MarthaBoyd (talk | contribs) No edit summary |
||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
=Description= | =Description= | ||
Equipment that can create a vacuum-like environment. To do so, the vacuum pump draws the air from inside the vacuum chamber. | |||
=Applications= | =Applications= | ||
*Stabilizing wood piece with cactus juice by drying it thoroughly, placing it in a container, submerging it in Cactus Juice resin within the vacuum chamber, and applying vacuum until bubbling ceases. This process turns soft, punky wood into hard, dense material by replacing air with resin. | |||
= | =Guides and Manuals= | ||
*[https://drive.google.com/file/d/1TDYqhxECfnndJz7qxCcnMxeCItblyIxJ/view?usp=drive_link Vacuum Chamber Set] | |||
==How to Use== | |||
#Setup | |||
##Plug the vacuum pump into power | |||
##Connect the vacuum pump to the vacuum chamber air outlet | |||
##Sit the vacuum chamber lid on the vacuum chamber | |||
##Close the air inlet valve | |||
##Open the air outlet valve | |||
#Drawing a Vacuum | |||
##Turn on the vacuum pump | |||
##Watch the pressure gauge | |||
##Close the air outlet valve when the desired vacuum is achieved | |||
##Turn off the vacuum pump | |||
#Vacuum Release | |||
##Open the air inlet valve | |||
=General Tips and Safety= | |||
*Prevent Floating: Use a submersion plate or weight to ensure the wood stays under the resin. | |||
*Avoid Contamination: Do not get water in the resin, and avoid letting resin get into the vacuum pump. | |||
*Pump Maintenance: Change vacuum pump oil after a long, heavy cycle. | |||
*Coloring: You can add up to 4 ounces of dye per gallon of Cactus Juice. | |||
=Helpful Videos= | |||
*[https://www.youtube.com/watch?v=hkqRlsuduY4&t=699s How to Stabilize Wood with Cactus Juice] | |||
*[https://www.youtube.com/watch?v=s7EoPC1Nlb4 How to Stabilize Wood and Why You Should Do It] | |||
[[Category: Tool]] | |||
[[Category: Wood Shop]] | [[Category: Wood Shop]] | ||
[[Category: Safety Checkout]] | |||
Latest revision as of 11:25, 13 February 2026
Description
Equipment that can create a vacuum-like environment. To do so, the vacuum pump draws the air from inside the vacuum chamber.
Applications
- Stabilizing wood piece with cactus juice by drying it thoroughly, placing it in a container, submerging it in Cactus Juice resin within the vacuum chamber, and applying vacuum until bubbling ceases. This process turns soft, punky wood into hard, dense material by replacing air with resin.
Guides and Manuals
How to Use
- Setup
- Plug the vacuum pump into power
- Connect the vacuum pump to the vacuum chamber air outlet
- Sit the vacuum chamber lid on the vacuum chamber
- Close the air inlet valve
- Open the air outlet valve
- Drawing a Vacuum
- Turn on the vacuum pump
- Watch the pressure gauge
- Close the air outlet valve when the desired vacuum is achieved
- Turn off the vacuum pump
- Vacuum Release
- Open the air inlet valve
General Tips and Safety
- Prevent Floating: Use a submersion plate or weight to ensure the wood stays under the resin.
- Avoid Contamination: Do not get water in the resin, and avoid letting resin get into the vacuum pump.
- Pump Maintenance: Change vacuum pump oil after a long, heavy cycle.
- Coloring: You can add up to 4 ounces of dye per gallon of Cactus Juice.