Difference between revisions of "Belt and Disc Sander"
Jump to navigation
Jump to search
(Created page with "400px|thumb =About our machine= *Model: * =Guides and Manuals= * =General Tips and Safety= * =Helpful Videos= * =Maintenance= * Parts:...") |
(→General Tips and Safety: - none were present, added some based on other safety info online) |
||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
=About our machine= | =About our machine= | ||
* | *ShopFox Belt and Disc Sander W1676 | ||
* | **6" x 48" belt, 10" disc, typically 80 grit | ||
*Delta 12" Disc Sander 31-122 | |||
**12" Disc, typically 220 grit | |||
=Guides and Manuals= | =Guides and Manuals= | ||
* | *[https://drive.google.com/open?id=1ciKA4EcyjryV_Ik2L_HK-KglcVp5s4Tg ShopFox Belt and Disc Sander] | ||
*[https://drive.google.com/open?id=1JMKsiNXFkLUaIOqo9gFY67eUTk5SEaDT Delta 12" Disc Sander] | |||
=General Tips and Safety= | =General Tips and Safety= | ||
* | *ALWAYS use dust collection with this tool. | ||
*ALWAYS sand on the downward side of the disc (Left side) when using the disc portion of the machine. Sanding on the upward side of the disc could cause the work piece to fly up which could be dangerous. | |||
*Sand lightly; do not force wood into the belt or disc. | |||
*Clean the belt or disc with the rubber stick periodically as you are working and when you are finished. | |||
*When you are done: Clean the belt/ disc, turn off the machine, sweep up around the machine; and throw away any scraps. | |||
=Helpful Videos= | =Helpful Videos= | ||
| Line 15: | Line 22: | ||
=Maintenance= | =Maintenance= | ||
* | '''Periodically''' | ||
* Check switch, cords and plugs and replace if worn. | |||
* Replace damaged sanding belts or discs. | |||
* Tighten mounting bolts. | |||
[[Category: Tool]] | [[Category: Tool]] | ||
[[Category: Wood Shop]] | |||
[[Category: Safety Checkout]] | |||
Latest revision as of 14:46, 4 February 2025
About our machine
- ShopFox Belt and Disc Sander W1676
- 6" x 48" belt, 10" disc, typically 80 grit
- Delta 12" Disc Sander 31-122
- 12" Disc, typically 220 grit
Guides and Manuals
General Tips and Safety
- ALWAYS use dust collection with this tool.
- ALWAYS sand on the downward side of the disc (Left side) when using the disc portion of the machine. Sanding on the upward side of the disc could cause the work piece to fly up which could be dangerous.
- Sand lightly; do not force wood into the belt or disc.
- Clean the belt or disc with the rubber stick periodically as you are working and when you are finished.
- When you are done: Clean the belt/ disc, turn off the machine, sweep up around the machine; and throw away any scraps.
Helpful Videos
Maintenance
Periodically
- Check switch, cords and plugs and replace if worn.
- Replace damaged sanding belts or discs.
- Tighten mounting bolts.