Difference between revisions of "Belt and Disc Sander"
Jump to navigation
Jump to search
(Updated Maintenance with info from the tool maintenance spreadsheet.) |
(→General Tips and Safety: - none were present, added some based on other safety info online) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 12: | Line 12: | ||
=General Tips and Safety= | =General Tips and Safety= | ||
* | *ALWAYS use dust collection with this tool. | ||
*ALWAYS sand on the downward side of the disc (Left side) when using the disc portion of the machine. Sanding on the upward side of the disc could cause the work piece to fly up which could be dangerous. | |||
*Sand lightly; do not force wood into the belt or disc. | |||
*Clean the belt or disc with the rubber stick periodically as you are working and when you are finished. | |||
*When you are done: Clean the belt/ disc, turn off the machine, sweep up around the machine; and throw away any scraps. | |||
=Helpful Videos= | =Helpful Videos= | ||
| Line 19: | Line 23: | ||
=Maintenance= | =Maintenance= | ||
'''Periodically''' | '''Periodically''' | ||
Check switch, cords and plugs and replace if worn. | * Check switch, cords and plugs and replace if worn. | ||
Replace damaged sanding belts or discs. | * Replace damaged sanding belts or discs. | ||
Tighten mounting bolts. | * Tighten mounting bolts. | ||
Latest revision as of 14:46, 4 February 2025
About our machine
- ShopFox Belt and Disc Sander W1676
- 6" x 48" belt, 10" disc, typically 80 grit
- Delta 12" Disc Sander 31-122
- 12" Disc, typically 220 grit
Guides and Manuals
General Tips and Safety
- ALWAYS use dust collection with this tool.
- ALWAYS sand on the downward side of the disc (Left side) when using the disc portion of the machine. Sanding on the upward side of the disc could cause the work piece to fly up which could be dangerous.
- Sand lightly; do not force wood into the belt or disc.
- Clean the belt or disc with the rubber stick periodically as you are working and when you are finished.
- When you are done: Clean the belt/ disc, turn off the machine, sweep up around the machine; and throw away any scraps.
Helpful Videos
Maintenance
Periodically
- Check switch, cords and plugs and replace if worn.
- Replace damaged sanding belts or discs.
- Tighten mounting bolts.