Bestarc BTC500DP Plasma Cutter: Difference between revisions
Jump to navigation
Jump to search
MarthaBoyd (talk | contribs) No edit summary |
MarthaBoyd (talk | contribs) No edit summary |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:Bestarc BTC500DP.jpg|400px|thumb|Bestarc BTC500DP]] | |||
[[File: | |||
=About our machine= | =About our machine= | ||
*Model: Bestarc BTC500DP | *Model: Bestarc BTC500DP | ||
*110/220V | *Power: 110/220V | ||
=Guides and Manuals= | =Guides and Manuals= | ||
* | *[https://drive.google.com/drive/folders/0BzVFua5o5J7YM3kzcmk0TU5vMnc?resourcekey=0-%205BFnJ0lV0S4etCj7vQhDQ Bestarc BTC500DP Manual]] | ||
==Safety== | ==Safety== | ||
| Line 13: | Line 12: | ||
*Clear the area of all flammables | *Clear the area of all flammables | ||
*Avoid "blowback", which happens from either moving too fast or cutting in the middle of a workpiece rather than the edge | *Avoid "blowback", which happens from either moving too fast or cutting in the middle of a workpiece rather than the edge | ||
=Tips= | |||
*It is easier to pull the torch through the cut than to push it. | |||
*To cut thin material, reduce the amerage until you get the best quality cut. | |||
*Use the correct size tip orifice for the amperage being used. | |||
*For straight cuts, use a straight edge or cutting buggy as a guide. For circles, use a template or circle cutting attachment. | |||
*Check that the front end consumable parts of the plasma cutting torch are in good condition. | |||
==Helpful Videos== | ==Helpful Videos== | ||
*[https://www.youtube.com/watch?v==qd1L_9nljdg Plasma Cutter Basics] | *[https://www.youtube.com/watch?v==qd1L_9nljdg Plasma Cutter Basics] | ||
==Maintenance== | ==Maintenance== | ||
*The consumables may need replacing after using for awhile. There are | *The consumables may need replacing after using for awhile. There are 5 components that wear out: | ||
** | **Torch head | ||
** | **Electrode | ||
** | **Metal contact tip | ||
** | **Ceramic cup | ||
**Guider support | |||
==Replacement Parts== | ==Replacement Parts== | ||
[[Category: Tool]] | [[Category: Tool]] | ||
[[Category: Metal Shop]] | [[Category: Metal Shop]] | ||
[[Category: Safety Checkout]] | [[Category: Safety Checkout]] | ||
Latest revision as of 12:42, 24 October 2025
About our machine
- Model: Bestarc BTC500DP
- Power: 110/220V
Guides and Manuals
Safety
- Eye protection: Shade 9-12 (depending on intensity of arc)
- Wear protective clothing: leather gloves, leather apron, cotton clothing. (no polyester/synthetics!)
- Clear the area of all flammables
- Avoid "blowback", which happens from either moving too fast or cutting in the middle of a workpiece rather than the edge
Tips
- It is easier to pull the torch through the cut than to push it.
- To cut thin material, reduce the amerage until you get the best quality cut.
- Use the correct size tip orifice for the amperage being used.
- For straight cuts, use a straight edge or cutting buggy as a guide. For circles, use a template or circle cutting attachment.
- Check that the front end consumable parts of the plasma cutting torch are in good condition.
Helpful Videos
Maintenance
- The consumables may need replacing after using for awhile. There are 5 components that wear out:
- Torch head
- Electrode
- Metal contact tip
- Ceramic cup
- Guider support