Difference between revisions of "Category:CNC Routers"

Latest revision as of 15:15, 5 July 2025

Shapeoko 5 visible up front, with Shapeoko 3 against back wall

Machines:

Software:

Never leave a CNC machine running unattended! If it crashes and you're not around to stop it, a lot of damage could be done to the machine and your workpiece.
Wear safety glasses and hearing protection.

There are a few bits we keep in stock:

The following 2 pages are in this category, out of 2 total.

@@ Line 4: / Line 4: @@
 *This page is for info relating to our various CNC Routers.
 *Models:
-**[[Fireball V90 CNC]]
 **[[Shapeoko 3]] (33"x17")
 **[[Shapeoko 5]] (48"x48")
@@ Line 13: / Line 12: @@
 ==Guides and Manuals==
 Machines:
-*[https://www.probotix.com/wiki/index.php/V90 Fireball V90] - Info on Probotix website
 *[http://shapeoko.com/wiki/ Shapeoko CNC Wiki]
@@ Line 41: / Line 39: @@
 *60 Degree V-bit (1/2" shank)
 *90 Degree V-bit (1/2" shank)
-We also have many bits with 1/8" shank size. Most of these are only appropriate in the [[Fireball V90 CNC]], but can be used in the others with a 1/4" to 1/8" adapter. If you use these adapters, be very cautious as they can't stand up to deep cuts and can slip out of the router.
 ==Other Resources==