Difference between revisions of "Consew Sewing Machine"
Jump to navigation
Jump to search
m |
m |
||
| Line 37: | Line 37: | ||
[[Category: Textiles Lab]] | [[Category: Textiles Lab]] | ||
[[Category: Safety Checkout]] | [[Category: Safety Checkout]] | ||
[[Category: Sewing Machine]] | |||
Latest revision as of 15:17, 5 July 2025
About our machine
- Model: Consew 226R-1
- Electronic Speed Controller C3000 or CSM1001
- This tool requires a safety checkout
Guides and Manuals
Standard Operating Procedure
- Oil Before Every Use - Oiling locations marked with red
- Ensure you have threaded the machine correctly. Refer to the manual or video every time.
- Plug in the machine and switch it on
- Adjust the speed using the control box to something appropriate for your project.
- Slow = 400 and under
- Medium = 800
- Fast = 1000 or greater
- Set the needle position to Up or Down depending on what is appropriate for your project.
- Perform the work
- When finished, clean off the machine, remove your thread. Leave a section of the top thread still in the machine to make it easy to re-thread it next time.
- Unplug and cover the machine
Helpful Videos
- Threading Industrial Sewing Machine the Right Way Consew 226 Walking Foot
- How to Thread a Consew 226 Ver 2 (starts at 10:27)
- Demo Video
Maintenance
Parts:
- Takes standard 135x17 needles