Microlux Table Saw: Difference between revisions
Jump to navigation
Jump to search
MarthaBoyd (talk | contribs) No edit summary |
MarthaBoyd (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
[[File:microluxtablesaw.jpg|400px|thumb]] | [[File:microluxtablesaw.jpg|400px|thumb]] | ||
=About our machine= | =About our machine= | ||
*Model: | *Model: Micro-Mark MicroLux Minature Table Saw | ||
=Guides and Manuals= | =Guides and Manuals= | ||
| Line 8: | Line 7: | ||
=General Tips and Safety= | =General Tips and Safety= | ||
* | *Do not overload the machine. | ||
*Do not wear loose clothes or jewelry. | |||
*Do not carry the machine by the electric cable. | |||
*Replace dull saw blades. | |||
*Clean the machine thoroughly after completing your work. | |||
*Unplug the electric cord before maintaining the machine, before changing the saw blade or the toothed belt, or when not using the machine. | |||
*Use a push stick when working near the saw blade. | |||
=Helpful Videos= | =Helpful Videos= | ||
* | *[https://www.youtube.com/watch?v=rEDgZQ0j8Ys Trying out my MIcroLux table saw] | ||
=Maintenance= | =Maintenance= | ||
* | *Only use blades which are in good condition! Replace blades when wear is apparent. | ||
*No lubrication is required. | |||
*Duty Cycle (Running Time) is 50/50. Meaning, use for up to 30 minutes and let cool for 30 minutes. If the machine ever gets too hot from running excessively, components could be damaged. | |||
Parts: | Parts: | ||
*For replacement parts, contact our Technical Service Department at tech@micromark.com | |||
Latest revision as of 11:09, 21 November 2025
About our machine
- Model: Micro-Mark MicroLux Minature Table Saw
Guides and Manuals
General Tips and Safety
- Do not overload the machine.
- Do not wear loose clothes or jewelry.
- Do not carry the machine by the electric cable.
- Replace dull saw blades.
- Clean the machine thoroughly after completing your work.
- Unplug the electric cord before maintaining the machine, before changing the saw blade or the toothed belt, or when not using the machine.
- Use a push stick when working near the saw blade.
Helpful Videos
Maintenance
- Only use blades which are in good condition! Replace blades when wear is apparent.
- No lubrication is required.
- Duty Cycle (Running Time) is 50/50. Meaning, use for up to 30 minutes and let cool for 30 minutes. If the machine ever gets too hot from running excessively, components could be damaged.
Parts:
- For replacement parts, contact our Technical Service Department at tech@micromark.com