CNC Plasma Cutter

Langmuir CNC Plasma Cutter

About our machine

• Manufacturer: Langmuir Systems
• Model: CrossFire Pro
• Cutting Area: 48.25” (X) x 33.3” (Y) x 2.75" (Z) + 3” Manual Height Adjustment
• Computer:
• Control Software: FireControl
• Plasma Cutter: Hypertherm Powermax45 Sync Model# 088184
• Max cutting capacity: 5/8" thick steel

Guides and Manuals

• Plasma Safety - Manufacturer's safety warnings for plasma cutting.
• Cut With FireControl - Manufacturer's guide to software use.
• CrossFire Pro Assembly Guide
• Manufacturer User Guides
  • Introduction
  • CNC Plasma
  • Software Workflow
  • CAD/CAM with Fusion360
  • Cut with FireControl
  • CAM with SheetCAM
  • LS-Torch Height Controller Guide
• Hypertherm45 Sync
  • Operator Manual
  • Cut Charts Guide
  • Mechanized Cutting Guide

Important Notes

• Use welding goggles or a welding helmet when using this tool. It creates bright arcs that can damage your eyes.
• Use gloves when handling materials. Edges can be sharp, and recently cut metals will be hot.
• When pieces are cut free from the main material, they may shift and fall into the table, or they may tilt upwards and potentially collide with the nozzle as it moves. Stop the machine if it is at risk for colliding in this way.
• Check the manual for the plasma cutter to determine which nozzle and what settings to use for your material type and thickness.
• The water table needs to be changed every 1-2 weeks depending on usage.
  • When draining, DO NOT allow metal particulate to go down the utility sink. Filter it out with a cheese cloth or scrap fabric and toss in the garbage.

Consumables

• Torch tips

Cut Charts

External Resources

• FireShare - Manufacturer database for downloading and sharing free, cut-ready files.