Microlux Table Saw
About our machine
- Model: Micro-Mark MicroLux Minature Table Saw
Guides and Manuals
General Tips and Safety
- Do not overload the machine.
- Do not wear loose clothes or jewelry.
- Do not carry the machine by the electric cable.
- Replace dull saw blades.
- Clean the machine thoroughly after completing your work.
- Unplug the electric cord before maintaining the machine, before changing the saw blade or the toothed belt, or when not using the machine.
- Use a push stick when working near the saw blade.
Helpful Videos
Maintenance
- Only use blades which are in good condition! Replace blades when wear is apparent.
- No lubrication is required.
- Duty Cycle (Running Time) is 50/50. Meaning, use for up to 30 minutes and let cool for 30 minutes. If the machine ever gets too hot from running excessively, components could be damaged.
Parts:
- For replacement parts, contact our Technical Service Department at tech@micromark.com