Difference between revisions of "Plasma Cutters"
Jump to navigation
Jump to search
(Created page with "400px|thumb 400px|thumb =About our machine= *Model: * =Guides and Manuals= * =General Tips and Safety= *...") |
(added notes on maintenance, fixed header formatting to be level 2 "==" instead of level 1 (which is standard practice, shouldn't use level 1 headers anywhere)) |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:plasmacuttercut50.jpg|400px|thumb]] | [[File:plasmacuttercut50.jpg|400px|thumb]] | ||
=About our machine= | ==About our machine== | ||
*Model: | *Model: FDS CUT50 | ||
* | *Power: 220V | ||
*Needs to be connected to compressed air to operate | |||
=Guides and Manuals= | ==Guides and Manuals== | ||
* | *[https://drive.google.com/open?id==1-k8SLrQjercRSKOUqSoHYDAfJyDJUuSO FDS CUT50] | ||
= | ==Safety== | ||
* | *Eye protection: Shade 9-12 (depending on intensity of arc) | ||
*Wear protective clothing: leather gloves, leather apron, cotton clothing. (no polyester/synthetics!) | |||
*Clear the area of all flammables | |||
*Avoid "blowback", which happens from either moving too fast or cutting in the middle of a workpiece rather than the edge | |||
= | ==Helpful Videos== | ||
* | *[https://www.youtube.com/watch?v==qd1L_9nljdg Plasma Cutter Basics] | ||
*[https://www.youtube.com/watch?v==84xB6ULeAUc Plasma Cutter and OxyFuel Cutting] | |||
==Maintenance== | |||
*The consumables may need replacing after using for awhile. There are 4 components that wear out: | |||
**The ceramic cup | |||
**The metal electrode | |||
**The metal contact tip | |||
**The ceramic ring | |||
==Replacement Parts== | |||
*[https://www.amazon.com/gp/product/B0746H65CQ 100 Pcs Plasma Cutting Consumables for CUT50 machine] | |||
[[Category: Tool]] | [[Category: Tool]] | ||
[[Category: Metal Shop]] | |||
[[Category: Safety Checkout]] | |||
Latest revision as of 12:36, 20 July 2023
About our machine
- Model: FDS CUT50
- Power: 220V
- Needs to be connected to compressed air to operate
Guides and Manuals
Safety
- Eye protection: Shade 9-12 (depending on intensity of arc)
- Wear protective clothing: leather gloves, leather apron, cotton clothing. (no polyester/synthetics!)
- Clear the area of all flammables
- Avoid "blowback", which happens from either moving too fast or cutting in the middle of a workpiece rather than the edge
Helpful Videos
Maintenance
- The consumables may need replacing after using for awhile. There are 4 components that wear out:
- The ceramic cup
- The metal electrode
- The metal contact tip
- The ceramic ring