Bambu H2C Printer: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 64: | Line 64: | ||
=Guides and Manuals= | =Guides and Manuals= | ||
*[https://wiki.bambulab.com/en/h2c/first-print | *[https://wiki.bambulab.com/en/h2c/manual/first-print] - Official setup and first print walkthrough | ||
*[https://wiki.bambulab.com/en/ | *[https://wiki.bambulab.com/en/h2/troubleshooting] - H2 series - Fix common print errors, hotend issues, and calibration problems | ||
*[https://wiki.bambulab.com/en/ | *[https://wiki.bambulab.com/en/h2/maintenance] - H2 Series Maintenance and How To Guides | ||
=Videos= | =Videos= | ||
*[https://youtu.be/bRYdVY6EyXE?si=-MHsSw2__a57LQW_] - from BambuLab | *[https://youtu.be/bRYdVY6EyXE?si=-MHsSw2__a57LQW_] - from BambuLab | ||
*[https://www.youtube.com/live/4ZEKw97zEUk?si=4jZXaQZE6GEuT4bj] - from BambuLab | *[https://www.youtube.com/live/4ZEKw97zEUk?si=4jZXaQZE6GEuT4bj] - from BambuLab | ||
| Line 102: | Line 94: | ||
=Maintenance= | =Maintenance= | ||
*[https://wiki.bambulab.com/en/h2c/maintenance/period-maintenance] | *[https://wiki.bambulab.com/en/h2c/maintenance/period-maintenance] - Regular Cleaning and Maintenance Recommendations for the H2C | ||
*[https://www.youtube.com/watch?v=ykDKWAVExj4&list=PLFUVS59deIm28tUJ4mY8t1_dpDJ1DSKtD Bambu Lab How-To playlist] - various quick videos on repair and replacement | *[https://www.youtube.com/watch?v=ykDKWAVExj4&list=PLFUVS59deIm28tUJ4mY8t1_dpDJ1DSKtD Bambu Lab How-To playlist] - various quick videos on repair and replacement | ||
Revision as of 16:22, 7 April 2026
About our machines
This page is a work in progress, you are welcome to add useful information here
Bambu H2C Printer
- Build Volume: Single Nozzle Printing: 325*320*320 mm³ (Left) Single Nozzle Printing: 305*320*325 mm³ (Right) Dual Nozzle Printing: 300*320*325 mm³ Total Volume for Two Nozzles: 330*320*325 mm³
- Chassis: Aluminum and Steel
- Max Nozzle Temperature: 350℃
- Nozzle: Hardened Steel
- Supported Nozzle Diameter: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
- Filament Cutter: Built-in
- Filament Diameter: 1.75 mm
- Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor
- Build Plate Material: Flexible Steel Plate
- Included Build Plate Type: Textured PEI Plate
- Build Plate Material: Flexible Steel Plate
- Supported Build Plates: Textured PEI Plate, Engineering Plate
- Max Heatbed Temperature: 120℃
- Max Toolhead Speed: 1000 mm/s
- Max Acceleration: 20,000 mm/s²
- Max Flow Rate: 40 mm³/s
- Active Chamber Heating: Supported
- Max Chamber Temperature: 65℃
- Pre-filter Grade: G3
- HEPA Filter Grade: H12
- Activated Carbon Filter: Granulated Coconut Shell
- Supported Filaments: PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, Carbon/Glass Fiber Reinforced Materials
- Live View Camera: Built-in (1920×1080)
- Nozzle, BirdsEye, Toolhead Camera: Built-in
- Filament Runout Sensor: Supported
- Filament Tangle Sensor: Supported
- Power Loss Recovery: Supported
- Voltage: 100–120 VAC / 200–240 VAC, 50/60 Hz
- Max Power: 1800W (220V) / 1250W (110V)
- Typical Power: 200W
- Operating Temperature: 10–30℃
- Touchscreen: 5-inch 720×1280
- Storage: 8GB EMMC + USB
- Control Interface: Touchscreen, Mobile App, PC App
- Motion Controller: Dual-core Cortex-M4 + Cortex-M7
- Application Processor: Quad-core 1.5GHz ARM A7
- Slicer: Bambu Studio (Supports third-party slicers)
- Software
General Rules
- Reserve Time! For the printers, reserve time after your print starts on the Reserve Time page.
- Always Watch the First Layer! If a print doesn't start well, it's not going to end well.
- If a print has more delicate features or overhangs that you think has a chance to fail, watch it more closely and check in on it.
- Do not log in to your personal Bambu account! If you wish to download files through their portal, please do so in the web browser or on your own computer. Logging into the Bambu software on the shared computers will change the standard settings other members are accustomed to and create confusion.
- Double-check your filament choice before printing! Make sure that all these match: the filament loaded in the machine, the material type in the Prepare screen in the Bambu software, and the final print screen when it is confirming what printer and which AMS slot you wish to use.
- Notes on Build Plates:
- Textured plate - good for PLA and most plastics. The rough surface helps plastic hold on. Do not use glue on these.
- Smooth plate - good for ABS, Nylon, and more difficult high-temp materials. Usually needs a thin layer of gluestick to help parts adhere.
- Cleaning the plates - use soap and water or isopropyl alcohol to clean reside that may prevent prints from sticking to the bed.
Guides and Manuals
- [1] - Official setup and first print walkthrough
- [2] - H2 series - Fix common print errors, hotend issues, and calibration problems
- [3] - H2 Series Maintenance and How To Guides
Videos
Troubleshooting
The printers have a comprehensive system that shows an error code for many situations. You can look these codes up on BambuLab's website at the link below, and you will find instructions on how to fix almost everything.
HMS Error Codes - look up errors displayed on the printer when they occur to find troubleshooting instructions
Common Issues:
- Filament jam
- If the filament roll is getting stuck in the AMS:
- Roll is almost empty: try adding a desiccant pod in the inner space of the spool to help weight it down. When the spool is almost empty it becomes very easy for it to tip inside the AMS because it is so light.
- If the filament roll is getting stuck in the AMS:
- Print not sticking
- If using a textured plate
- Clean the plate with soap and water. Dry thoroughly. Try print again.
- If using a smooth plate
- Add a thin layer of glue stick and let it dry. Try print again.
- If using a textured plate
Maintenance
- [6] - Regular Cleaning and Maintenance Recommendations for the H2C
- Bambu Lab How-To playlist - various quick videos on repair and replacement