JDS Air-Tech 2000

About our machine

• Model:
• JDS Air-Tech 2000

Guides and Manuals

• No Manual Found, I will keep looking GK

Safety

• Electrical & Mechanical SafetyCeiling Mounting: If hanging the unit from the ceiling, ensure the mounting hardware (like chains and eye bolts) is rated for the unit's weight (typically 65+ pounds). Adding supplemental safety chains is highly recommended.Power & Unplugging: Always disconnect the unit from the power source before opening the cabinet, checking the fan, or changing the filters.No Direct Replacements from Maker: The original manufacturer (JDS Tools) has ceased operations. Because factory support and original manuals are scarce, it is critical to rely on aftermarket suppliers for replacement filters.

Maintenance

• The 3-Stage Filtration MechanicsThe system purifies ambient shop air using a highly efficient progression of filters:Stage 1: Pre-Filter (Intake): Captures coarse dust particles right at the entrance. Units typically ship with a disposable fiberglass pad, though many owners upgrade to a 1-inch washable electrostatic pre-filter (like the MERV 6 Electrostatic Replacement) to save on long-term replacement costs.Stage 2: High-Efficiency Internal Bag Filter: A multi-pocket bag filter (typically MERV 14 or MERV 15 rated) that stops 99% of particles down to 5 microns and 91% of micro-particles down to 1 micron. This handles the ultra-fine, lung-damaging dust.Stage 3: Diffusing & Odor Control (Exhaust): A final rear diffusing grid breaks up the exhaust stream to prevent direct drafts in your workspace. This stage can be paired with an optional activated charcoal filter to eliminate finishing fumes, smoke, and chemical odors.Maintenance & Finding ReplacementsBecause the original brand is no longer actively producing new units, knowing how to preserve yours is key:Filter Swaps: Third-party manufacturers continue to supply aftermarket filters. High-quality replacements, such as three-pocket internal bags or disposable pre-filters, are widely available through woodshop outlets like Highland Woodworking or Filtra Supply.Cleaning Routine: Disconnect the power before maintenance. Remove the outer pre-filter monthly to vacuum or wash it off. The internal bag filter can be removed through the side panel and gently tapped out or lightly vacuumed with a soft brush attachment—never use high-pressure compressed air, as it will tear the high-efficiency media.

Parts: Looking for the exact filter replacement, still looking.