Difference between revisions of "(Archived) TAZ Pro"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
[[File:Lulzbottazpro.jpg|400px|thumb]] | [[File:Lulzbottazpro.jpg|400px|thumb]] | ||
=About our machine= | = About our machine = | ||
*Model: Lulzbot TAZ Pro | |||
*Nozzle Diameter 0.25mm - 0.8mm | * Model: Lulzbot TAZ Pro | ||
*Tool Head: TAZ Pro Dual Extruder, 2x E3D 0.50mm nozzle | * Nozzle Diameter 0.25mm - 0.8mm | ||
*Layer Resolution: 0.05 mm - 0.4 mm (0.002 in - 0.02 in) | * Tool Head: TAZ Pro Dual Extruder, 2x E3D 0.50mm nozzle | ||
*Max Hot End Temperature: 290°C | * Layer Resolution: 0.05 mm - 0.4 mm (0.002 in - 0.02 in) | ||
*Max Print Surface Temperature: 120°C | * Max Hot End Temperature: 290°C | ||
*Print Surface: | * Max Print Surface Temperature: 120°C | ||
*Leveling: Automatic Z-Axis Compensation | * Print Surface: Spring steel and PEI | ||
*Maximum Print Speed 200 mm/sec | * Leveling: Automatic Z-Axis Compensation | ||
*Filament Compatibility PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments. | * Maximum Print Speed 200 mm/sec | ||
*Filament Diameter 2.85 mm | * Filament Compatibility PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments. | ||
*Print Volume 280 mm x 280 mm x 285 mm (11.02" x 11.02" x 11.22") | * Filament Diameter 2.85 mm | ||
* Print Volume 280 mm x 280 mm x 285 mm (11.02" x 11.02" x 11.22") | |||
The software we use to prepare files for printing is Simplify3D. To run a print, save the gcode file to a USB drive, then plug it in to the port located above the touch screen. | The software we use to prepare files for printing is Simplify3D. To run a print, save the gcode file to a USB drive, then plug it in to the port located above the touch screen. | ||
Note: This printer uses 2.85mm filaments. All of the other printers in the Electronics Lab use 1.75mm filaments. They are not compatible with each other. | |||
=Guides and Manuals= | =Guides and Manuals= | ||
Revision as of 12:40, 16 November 2021
About our machine
- Model: Lulzbot TAZ Pro
- Nozzle Diameter 0.25mm - 0.8mm
- Tool Head: TAZ Pro Dual Extruder, 2x E3D 0.50mm nozzle
- Layer Resolution: 0.05 mm - 0.4 mm (0.002 in - 0.02 in)
- Max Hot End Temperature: 290°C
- Max Print Surface Temperature: 120°C
- Print Surface: Spring steel and PEI
- Leveling: Automatic Z-Axis Compensation
- Maximum Print Speed 200 mm/sec
- Filament Compatibility PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments.
- Filament Diameter 2.85 mm
- Print Volume 280 mm x 280 mm x 285 mm (11.02" x 11.02" x 11.22")
The software we use to prepare files for printing is Simplify3D. To run a print, save the gcode file to a USB drive, then plug it in to the port located above the touch screen.
Note: This printer uses 2.85mm filaments. All of the other printers in the Electronics Lab use 1.75mm filaments. They are not compatible with each other.
Guides and Manuals
- Make sure to wait until the printer has finished printing the entire first layer with no issues before walking away. If it has issues, stop the print and try to troubleshoot.
General Tips and Safety
- Always watch the first layer! If it's not sticking down to begin with, it's not going to work.
Helpful Videos
Maintenance
Basic
Advanced
Main Menu
| General | Spaces | Tools | Volunteer | Instructors | Community | Communication |
|
- - - - - - |
Reimbursement Form - paper Reimbursement Form - digital
|
Slack - member chat |
- - - - - - |